1. Overview
AFK thyristor switching switch is electronic switch without mechanical contact.A
2. Model description
Table 1 Selection table
3. Technical indicators
Environmental conditions
Altitude：≤2000m
Ambient temperature：-25～70℃
Relative humidity：40℃，≤90%
Atmospheric pressure：79.5～106.0Kpa
No conductive dust,egyptian, corrosive gas,flammable and explosive medium.
Rated voltage
Three phase：AC380V±20%，50Hz±10%
Single phase：AC220V±20%，50Hz±10%
Working power：：AC380V/AC220V±20％ 50Hz ± 10%
Power supply voltage harmonic distortion rate:≤5%
Control voltage:DC 5V-12V, 10mA/channel control with acceptable control output
Basic parameters
Capacity specification：Three-phase co-complement ≤60kvar
Single phase complement ≤50kvar
Local power consumption：≤3VA
Dynamic response time: After the controller sends out the signal or cuts off the signal, the input and the cut action are completed within 10ms.
4. Wiring
Main circuit：L1、L2、L3：Power access
C1、C2、C3：Connected to the capacitor side
Control loop：
Three phase：V+ end：Positive end of the control voltage
KIN end：Negative terminal of control voltage
Single phase：V+ end：Positive end of the control voltage
KA：Phase A control voltage positive terminal
KB：Phase B control voltage positive terminal
KC：Phase C control voltage positive terminal